What information do you need?
Check whether your area already includes waste. Adding another allowance to an adjusted estimate can overstate the order.
This guide focuses on field shingles, particularly asphalt or bitumen products. Wood shingles, shakes and other roofing systems require their own coverage and installation assumptions.
How to use a shingle estimate
-
{{ sp.n }}
{{ sp.title }}
{{ sp.text }}
Roofing squares, bundles and individual shingles
Many asphalt-shingle products use three bundles per square, but exceptions exist. GAF’s guide to shingle bundle coverage explains why the package or product specification should determine the conversion. GAF
Use installed coverage, which accounts for the product’s specified exposure and overlap. Adding together the full physical dimensions of individual shingles does not establish their roof coverage.
How to calculate roofing shingles
Worked example: a 1,500-square-foot roof
Assume:
The coverage figure is an example assumption, not a specification for a named product.
This is an internally consistent material estimate under the stated assumptions. Replacing the product with one having different coverage changes the bundle count.
How roof pitch changes the area
A sloping roof surface is larger than its horizontal projection.
For a roof plane with uniform pitch p:12:
Here, p is the rise per 12 horizontal units.
At 6:12, the multiplier is approximately 1.118. A correctly defined 1,200 ft² horizontal roof projection therefore corresponds to approximately 1,341.64 ft² of sloped surface before waste.
This method assumes the projected area and pitch describe the same roof surface. For different pitches, calculate each section separately. Do not apply the multiplier to an area already measured along the slope.
How much extra material should you allow?
There is no allowance that fits every roof.
Cuts at hips, valleys, rakes and dormers can affect offcuts and material use. Product layout, reuse of suitable offcuts, handling damage and any planned spare material also affect the order.
GAF discusses a 10–15% allowance in its estimating guidance, but that is not a universal requirement or a substitute for a project-specific takeoff. GAF
Keep these quantities separate:
Avoid adding the same allowance at several stages.
Field shingles are only part of the material list
The field-shingle estimate does not automatically include:
Hip and ridge caps use linear coverage rather than ordinary field-shingle area coverage. GAF’s hip and ridge cap guidance explains that coverage varies with the product and installed exposure. GAF
Follow the selected roofing system’s instructions rather than assuming accessories can always be cut from leftover field shingles.
Common estimating mistakes
The estimate does not determine whether the product is suitable for the roof slope, substrate or local installation conditions.


